Effect of bristle pack position on the rotordynamic characteristics of brush-labyrinth seals at various operating conditions

Over the last few decades, the research on the effect of bristle pack position on the rotordynamic characteristics of the brush-labyrinth seals is not sufficient. To this end, two kinds of brush-labyrinth seals for the bristle pack element installed upstream of the labyrinth teeth named BSU and installed downstream of the labyrinth teeth called BSD were used to investigate the effect of bristle pack position on the rotordynamic characteristics of the brush-labyrinth seals. Using the numerical model combining the porous medium model and the whirling rotor method, the rotordynamic characteristics of the BSU and BSD at various operating conditions including four kinds of pressure ratios, five kinds of inlet preswirl speeds and four kinds of rotor spinning speeds were conducted. The obtained results show that the effects of operating conditions on rotordynamic coefficients for the different seal configurations are different. The direct stiffness, cross-coupled stiffness and direct damping of the BSU are lower than those of the BSD. The rotordynamic coefficients of the BSU are more insensitive to the operating conditions variation. From the perspective of the seal stability, the BSU is a better brush-labyrinth seal configuration at high pressure ratio, high positive preswirl or high rotor spinning speed conditions. While in the case of low pressure ratio, low positive preswirl or low rotor spinning speed conditions, the BSD is a better choice.     

基于单目视觉原理的空间位置测量技术研究

为了提升空间位置测量的自动化程度，采用单目视觉原理建立空间成像方程，将三维的空间坐标转换为两维的图像坐标，由此实现单目视觉的空间位置测量。本文推导了单目视觉定位的基本成像方程，对建立的定位装置，进行了实际定位实验，实现了预期的测量结果。基于视觉原理的空间位置测量技术，具有良好的推广应用价值。     

飞机液压系统柱塞泵热分析

随着飞机液压系统向高压化、大功率化方向发展，液压系统的发热及温升问题受到了广泛关注。柱塞泵作为液压系统中重要的能量转换装置，对液压系统的功率损失和温度有重大的影响，良好的柱塞泵的热分析对液压系统的热设计和温度控制有重要的意义。然而传统的柱塞泵热分析方法，如平均油温法、软件仿真法和热节点网络法，因不够准确、高效和简洁而不能满足现代飞机液压系统热分析和热设计的相关需求。本文针对飞机液压系统柱塞泵发热的相关问题，采用基于集总参数的热网络分析方法，建立了柱塞泵热网络模型，通过对柱塞泵不同工况下的仿真，验证了模型的有效性和准确性，为柱塞泵及液压系统的热分析提供了参考。     

A systematic spatial bias in remembering eye positions

Categorical bias in location memory in geometric spaces is well established. The present study assessed the presence of the bias in locating eyes in images of human faces. Participants were presented with digital faces and indicated the position of one of the eyes in both upright and inverted orientations. Biases resulted from participants using multiple sources of accessible information. No differences were found for upright vs. inverted face images. Overall, the data were consistent with the retrieval category adjustment model. These distortions may be considered within the forensic context, when eyewitnesses work with a sketch artist or use a computer program to generate an image of the culprit.     

某机载探测系统自主回收技术的实现

针对某机载探测系统探头回收自动化程度低的问题，提出了在无需操作员干预情况下实现探头自主回收的技术方法。采用了先进的控制算法，将缆位角与探头、缆长进行结合并引入了绞车控制系统，使绞车对探头的回收速度及缆长可进行实时调整，并给出了3种不同缆位角摆动条件下缆长与探头回收速度的控制曲线关系。研发了自主回收装置，设计了能够实现自主回收功能的探头回收机构。实验验证表明：在无需人为干预的条件下，在缆位控制系统及自主回收机构的配合下，系统实现了对探头快速、安全的回收。     

A two-step weighted least-squares method for joint estimation of source and sensor locations: A general framework

It is well known that the Two-step Weighted Least-Squares(TWLS) is a widely used method for source localization and sensor position refinement. For this reason, we propose a unified framework of the TWLS method for joint estimation of multiple disjoint sources and sensor locations in this paper. Unlike some existing works, the presented method is based on more general measurement model, and therefore it can be applied to many different localization scenarios.Besides, it does not have the initialization and local convergence problem. The closed-form expression for the covariance matrix of the proposed TWLS estimator is also derived by exploiting the first-order perturbation analysis. Moreover, the estimation accuracy of the TWLS method is shown analytically to achieve the Cramér-Rao Bound(CRB) before the threshold effect takes place. The theoretical analysis is also performed in a common mathematical framework, rather than aiming at some specific signal metrics. Finally, two numerical experiments are performed to support the theoretical development in this paper.     

基于马鞍形磁场的永磁直线电机位置解算方法

针对直线电机转子位置检测低成本和较高精度的要求,提出了一种基于马鞍形磁场来获得位置信息的方法及实现过程。分析了永磁体表面的磁场分布特征,指出了利用马鞍形磁场分布曲线来解算位置信息的优点,提出了根据马鞍形磁场推算位置信息的算法流程:先测得错开相位的2条马鞍形曲线数据,划分为4个象限后建立数据库；位置检测时,运用区间搜索算法寻得实际角度所在区间；再根据精度要求,采用合适的插值算法计算得到待解算的角度。仿真结果表明:基于马鞍形磁场的位置解算,能较好地得到直线电机转子的位置信息。     

轴流压气机插板式进气畸变数值仿真

以航空发动机稳定性评价体系中常用的插板实验为背景,分别进行低速、高亚声速、跨声速轴流压气机与插板畸变发生器的耦合数值仿真,研究插板畸变条件下压气机的流场特性以及不同类型压气机在插板畸变影响下的失速起始机制。研究发现:转子进口截面的周向流动是影响低速压气机稳定边界的主要因素；插板角涡对转子叶顶泄漏涡的扰动是影响高亚声速压气机稳定边界的重要原因；畸变气流影响下的叶片通道内激波强度和位置的变化是影响跨声速压气机稳定边界的关键因素。      

脉冲爆震载荷作用下转子系统动力学特性

针对脉冲爆震涡轮发动机(PDTE)气动载荷具有周期性、非定常的特点,应用有限元法建立了PDTE转子系统动力学特性计算模型。在验证计算模型准确性的基础上,研究了周期性、非定常轴向力和扭矩对转子系统动力学特性的影响。研究结果表明:与传统燃气涡轮发动机相比,PDTE转子系统同时存在弯曲振动、轴向振动和扭转振动。脉冲爆震燃烧室的气动载荷会改变转子系统的弯曲刚度,但对气动载荷合理设计后,其对弯曲振动的影响较小。周期性、非定常轴向力引起转子系统轴向振动,且轴向振动特性主要受零频和1阶轴向共振频率处响应的影响。PDTE工作时滚珠轴承的轴向支反力会不断变向,在设计滚珠轴承时应予以考虑。周期性、非定常扭矩引起转子系统扭转振动,1阶扭转共振频率分量在扭转振动响应中占优。      

盘腔进气位置对径向预旋系统的影响

为减少径向预旋系统的流动损失,运用数值模拟方法对不同盘腔进气位置的径向预旋系统进行分析,结果表明:随着盘腔进气径向位置的增加,预旋喷嘴出口气流旋流比随之逐渐减小,径向预旋系统的温降系数及总压损失系数均随之逐渐增大。当旋转雷诺数等于7.9×106,盘腔进气位置由低位向高位变化时温降系数最大可增加525%,同时总压损失系数增加3.93%。径向预旋系统内比熵增主要发生在预旋喷嘴和共转腔,约占系统总体比熵增的80%。随着盘腔进气径向位置的增加,径向预旋系统总体比熵增降低,预旋喷嘴比熵增占比逐渐增大,共转腔比熵增占比逐渐减小。